TThe tube dominance test is used for investigating social dominance in mice.
The apparatus consist of a narrow clear Perspex tube with two removable central doors. The tube is provided with two supporting paws for ensuring its stability during the test.
After being habituated to run through the tube individually, two mice are placed in the tube into opposite ends. Once both mice get close to the doors, the doors are opened and the dominant mice will makes the submissive mouse reverse until it get out of the tube. When one animal has all four paws out of the tube, it is declared the loser while the animal remaining inside the tube is the winner, ending the match.
The number of wins is reported as a percentage of total number of matches. Additional information about the social hierarchies can be gained with the measurement of additional parameters such as duration of each match, latency to exit the tube, and more.
The foot misplacement corridor test is used for assessing motor coordination and balance (gait control) in small laboratory animal (rats and mice).
The foot misplacement corridor test is made of a narrow corridor with clear Plexiglas side walls and opened extremities connecting the corridor to two plastic home cages, one for each side. The floor of the corridor consists of removable metal bars. The animal is placed at one extremity of the corridor and is required to walk on the bars as if walking on a horizontal ladder. The use of a ladder allows observing separately the front and hind foot placement in order to accurately count the total number of foot misplacements (misseps).
The bars can be removed to vary the distance/space between the bars and make the test more difficult for the animal. The changes in bar spacing also prevent animals from learning the location of the bars and so minimize the ability of the animals to compensate for impairments through learning. The width of the corridor can be adjusted to the size of the animal to prevent the animal from turning around.
The system can be combined with the use of a video tracking system for video recording and eventually assess a global evaluation of the animal trajectory, displacement and speed during the test.
This test is a qualitative test with a high sensitivity to determine even subtle loss of movement capacity.
The inclined geotaxis board (slant board) is mainly used to assess motor coordination in rodents when challenged on a sloped surface.
The subjects are placed individually on the sloped platform facing in a downward direction (negative geotaxis). The latency to turn and orient themselves to be facing up the slope is recorded. This can be repeated at varying inclines to assess motor coordination and righting.
Delays in the ability to reorient could be indicative of delays in motor, balance, or vestibular function.
The inclined geotaxis board consists of sloped platforms of varying angles from horizontal to the desktop (0° to 90°).
Our Rota Rod provides an easy way to test the effects of drugs,brain damage, or diseases on motor coordination or fatigue resistance in rodents.
The animal is placed on the rotating lane of the Rota Rod and the timer is started. When the animal drops safely into its own lane, the time latency to fall (minutes and seconds) and rotation speed are automatically recorded. A removable upper separator for rat models is included to prevent interference between animals running in adjacent lanes.
The Rota Rod is controlled by an advanced microprocessor which provides precise timing control and ultra-accurate speed regulation. Rotation can be electronically set at a constant speed (2 to 90 rpm). Alternatively, acceleration rate may be selected at a defined time (2 to 5999 sec, 1 sec increments).
Unique in the market, the extended speed range (2 to 90 RPM)combined with the expanded acceleration mode settings, speed protocols and rocking modes, make the experimental reach of the rota rod exceptionally flexible.
The touchscreen graphic user interface allows clear visualization of timing and speed for each lane. Change modes, adjust speed, and create protocols right from the main screen for greater flexibility with maximum functionality and usability. The data can be read on the screen and/or exported to the SEDACOM software for saving the data in table form by lanes/trials.
The new integral cover option helps confine the animals if they fall off of the rod (only available for mice).
OxyletPro is a modular system integrating:
OxyletPro, an optimized system for studies in laboratory research models, utilizes indirect calorimetry to evaluate respiratory metabolism.
Food and drink intake and activity are evaluated using Panlab’s weight transducer technology. This highly stable technology permits the continuous assessment of consumption and spontaneous activity with superior accuracy. For a more comprehensive evaluation of activity, an Infrared (IR) frame can be added to monitor rearing behavior.
OxyletPro’s unique modular design allows for simple expandability. Start with the configuration that meets your requirements today, and expands as needs change and grow.
Special configurations are available for calorimetry studies with neonatal rat pups as well as exercise physiology studies with our single lane, airtight treadmills.
OxyletPro can be used in the following applications:
Obesity, diabetes, metabolic disorders, nutrition studies, chronobiology/circadian rhythm studies, drug screening, phenotyping and more!
OxyletPro uses a standard rodent home cage and uses an airtight lid to ensure the integrity of the sample environment. Simply change from a mouse lid to a rat lid - that is how easy it is to adapt the system for both species.
The home cages are autoclavable, making cleaning easy.
The air supply and switching unit allows for independent flow control to each connected cage and sends the cage samples in tandem to the gas analyzer for O2 and CO2 concentration analysis. Since the flow is independently controlled for each cage, the system has the flexibility to conduct simultaneous experiments of subjects of varying species and/or size, making OxyletPro extremely efficient.
Our gas analyzer features a high quality laser diode O2 sensor and Infrared spectroscopy CO2 sensor, allowing 0.01% resolution.
We offer special configurations for neonatal rats and our single lane airtight treadmills.
Opt for our airtight lids with transducers to add on food and drink intake monitoring! High precision extensiometric weight transducers are integrated into our airtight lid design and feature easy to access food and drink dispensers.
This extremely stable technology allows intake monitoring with the highest possible accuracy (0.02 g for food and 0.01 g for liquid).
Add on the sensor platform, which houses a third extensiometric weight transducer and continuously record spontaneous activity to clearly identify circadian patterns and activity levels. This highly precise capability will allow you to detect activity without displacement; even the finest movements by mice are detected.
For additional activity monitoring, our IR sensor bars are added to detect occurrence and duration of rearing events.
Metabolism offers software modules for respiratory metabolism (METAOXY), intake (METAINT), and activity (METACT) to complement our OxyletPro modular hardware. The NEW user interface features an Experiment Assistant which simplifies and expedites the setup and an Advanced Scheduler Tool for organizing and managing OxyletPro experiments. The Data analysis enhancements include runtime viewers and charts for real time monitoring, batch analysis and an option for data averaging.
Now with an improved, 1-minute switching time, OxyletPro and Metabolism provides greater resolution for the following parameters for each user-defined time interval:
NOTE: the calibration tanks are not provided with the system and should be purchased separately by the user (see specifications below).
The SMALGO system is a quick and reliable instrument to assess threshold sensitivity of the animal when applying a progressive force. A MUST for osteo-arthritis and pain studies!
The SMALGO system fits on your finger (thumb or index) and allows applying easily a force or pressure on the desired location. Designed for OA quantification, it is generally used on the knee joint or on the lumbar vertebrae for low back pain assessment.
The threshold sensitivity of the animal is quickly and reliably found when applying a progressive force, this threshold is immediately displayed on the electronic device in Grams, Newton, Ibs or Oz.
The instrument is composed of :
The operator adjusts the algometer (analgesimeter) to the thumb and applies a progressive pressure to the relevant location on the animal, as if he was applying the pressure directly with his own finger. The operator increases the stimulation until he obtains a reaction from the animal (scream, shudder...) and then stops the stimulation. The maximum force value is automatically saved and displayed on the screen of the instrument.
You can also connect the Smalgo to the BIO-CIS software. There are two ways of using Smalgo with this software :
Enhanced compatibility: The Smalgo control unit is now the same as other mechanical pain stimulators from Bioseb.
TTL Option: For laboratories that need compatibility between Smalgo and Electrophysiology, the instrument is eble to send TTL Signals between 0 and 5 volts.
Foot switch: With Smalgo, it is now possible to reset the value (tar/reset to zero) with a foot switch, allowing the operator to keep his both hands to manipulate the animal. The foot switch is systematically delivered with the Smalgo.
Bioseb's "Rodent Pincher" algometer allows calibrated forceps to induce quantifiable mechanical stimulation in the animal (rats or mice) on a linear scale. The most suitable protocol was experimented by determining the effects of 3 repetitive measurements on the 2 hindpaws, respectively over long-term (9 days), mid-term (1 day) and short-term (2 hours). It was primarily developed as an analgesimeter/algometer (analgesia measurement instrument) for nociceptive tests. In this specific use, the Rodents Pincher not only represents an alternative to the "RANDALL & SELITTO" test - but also presents the following advantages when compared to the classical test:
Furthermore, this pincher-based analgesia meter can also be used for other applications that require a controlled force or pressures values, for example :
Comparative studies (including comparative tests with the Randall & Sellito analgesimeter) have demonstrated the accuracy of this pincher-based algometer for easy, fast and reproducible measurement of mechanical pain threshold on rat limbs. Moreover, it allowed to perform rat analagesia testing with minimal constraint, which reduces data variability.
The pressure is applied in the "inter-digital" region. When used on the rat the pressure can also be applied to the tail. The instrument displays the force (in grams, newton, oz, lbs) at which the animal reacts and reports the nociception threshold.
Individual pain threshold measurements (up to 100) are stored in the internal memory, and can be downloaded post experiment. Recently an embedded statistical computation has been included in the electronic device of the algometer. This is a very useful feature that has been very well received and used by users of large numbers of tests. The display shows in real time the mean, standard deviation and variation coefficient from groups of animals (rats or mice). This feature also allows the user to cancel any analgesia test incorrectly performed.
The Dynamic Weight Bearing - New Incapacitance Test, is a new test for assessing spontaneous pain in freely moving rodents, which is based on an instrumented-floor cage and a combined video acquisition system. The Dynamic Weight Bearing test, especially suitable for research on Parkinson and allodynia, was a major break-through in the field of research on analgesia: operator-independent, time-saving, convenient for manipulating large amounts of rodents, and induces no stress on the animal (rat or mouse). The system has been used extensively by many customers from private firms to academic labs since 2008 for various types of research on analgesia and nociception.
The Dynamic Weight Bearing system also offers the possibility of conducting the experiment over a longer observational period (5 minutes) without an operator (thus reducing stress on the animal), and without any habituation period. With these exclusive features, the DWB opens a new and improved generation of instruments for drugs screening and optimization of preclinical models. The latest version is now a semi-automatic, operator-independent instrument.
Performing the same measurements as the original manual Version, the Advanced DWB (Dynamic Weight Bearing) improves two of the turnkey points of the system: the speed of operation and the operator independent factor. The Advanced DWB allows the user to reduce the most important phase of the process by a factor of 8 to 10, thus the analysis of 1 animal will take 1 to 2 minutes and be operator-independent.
The results encompass a lot of valuable information but will ask for a minimum of manpower and many more animal analysis can be done in the same amount of time than with a manual instrument. The software gives the weight distribution of the animal (rat or mouse), per limb, with additional ratio computations and filtering options.
Analysis and replay can be performed on site or remotely using Bioseb's exclusive software for Dynamic Weight Bearing and Incapacitance tests. During the analysis and replay, the operator can check and secure each limb recognition for hind and front paws. The weight distribution of the animal (rat or mouse) per limb is then shown in the result window, for each time period with the mean and the variation coefficient.
The Kinetic Weight Bearing (KWB) system is an alternative method generating quantitative data on footprints and gait in spontaneously moving animals.
The unique "sensor-mat" technology originally designed by Bioseb for the Dynamic Weight Bearing application has been refined and adapted to make kinetic analysis possible. This allows the weight borne by each individual paw to be tracked during a walking sequence in a corridor. The Kinetic Weight Bearing Instrument provides additional information on applied weight as well as the speed and acceleration of each paw as the animal moves toward an end point of the runway platform. This additional information provides data on coordination and gait comparison paw to paw and step to step. The system combines the video of a freely walking rodent (mouse or rat) with the pressure applied by each paw in real time using an array of not less than 4000 or 6000 sensors depending on the corridor's length.
The Kinetic Weight Bearing (KWB) Instrument offers automated parameter analysis for each paw of a rodent on Maximum Force (mN), Mass Velocity (N/s), and Maximum surface area (cm2). Additional Gait Parameters are also analyzed, speed, cadence, overlaps, and step patterns, are all compared and statistically processed. An automated analysis package is available for automatic analysis of a batch of experiments, saving time in analysis, and making the results more consistent and less operator dependent.
The instrument combines the video of a freely moving rodent with the data supplied by the mat including up to 6000 sensors that cover the full length of a corridor at the end of which lies the animal's home cage. Gait analysis can be carried out, and can be applied in the study of diseases such as CNS ischemia, SCI, and Neurotrauma, for example.
Bioseb has demonstrated that the rising time to the maximum force of each animal step differs across different animal models. The KWB is able to compare the path of the animal's "Geometric Center of Gravity" with the actual "Weighted Center of Gravity", and show significant differences. Changes in weight distribution from left to right, front to back and contra-lateral compensation are easily measured, thus providing useful information for your research work on nociception and analgesia.
Gait analysis has been extensively used in phenotyping of CNS diseases such as cerebral ischemia, neurodegenerative diseases, Spinal Cord Injury models and some pain models like neurotrauma (Nerve Crush, SNI…). The kinetic weight bearing system adds a major feature to existing gait analysis systems by including the measurement of the force applied by each individual paw to the floor the animal is walking upon.
The OxyletPro system is a modular system allowing the integration of respiratory metabolism (O2 consumption /CO2 production). Panlab provides a complete Oxylet solution enabling forced exercise training in a treadmill combined with indirect calorimetry in rodents.
Basically, Panlab Treadmill apparatus consists of a rolling belt with adjustable speed (up to 150 cm/s) and slope (from -25 to 25 degrees) and a control Unit. The rolling belt is built with especially selected materials to guarantee the best performance under conditions of intensive use and the minimum operations of maintenance, as well as simplicity in keeping it clean. The lanes (corridors of activity for the animal) have sufficient width for the subject to correct its errors in coordination, thereby allowing an exact measurement of the fatigue without deficiencies in motor coordination.
The treadmill unit controls the speed of the belt, shows measured data in its touchscreen display and provides electrical shock to the grid. The electrical shock supplied by the grid is of constant intensity (from 0 to 2 mA), that is, the current which circulates through the animal (and therefore its effect) only depends on the value of the mA chosen and not of the subject (quantity of body mass in contact with the bars, perspiration, etc.)
For metabolism studies, the treadmill is provided with an air isolated enclosure. The LE400 air flow control unit allows a fine regulation of the air flow inside the treadmill and sends the air to the LE450 gas analyzer for O2/CO2 gas concentrations determination.
The associated METABOLISM software transfers the data from the treadmill control unit and the gas analyzer to a PC computer using RS232/USB outputs for data storage and further analysis.
NOTE: the calibration tanks are not provided with the system and should be purchased separately by the user (see Specifications tab).